青岛大龙输送设备有限公司
全国统一咨询电话:
13780321177
当前位置: 网站首页>新闻资讯>1耐热输送带的用途和特点
产品分类
新闻资讯
1耐热输送带的用途和特点
1耐热输送带的用途和特点
主要用于冶金、建筑等行业输送烧结矿、焦炭、水泥熟料等高温物料。材料温度不超过800℃,表面温度不超过220℃。特点:采用EPR橡胶作为覆盖层,骨架材料采用国产专用高温帆布,独特的配方设计,解决了EPR橡胶饱和度高、附着力差、层间附着力低等问题。具有体轻、寿命长(约2-4倍)、耐热性好等特点。

耐热输送带的物理性能

使用ISO/FDIS14890-1999国际标准草案,实现带橡胶或塑料覆盖的通用织物输送带。

的最新规定产品标准样品的制备硫化或热塑性橡胶,耐热带标本的测量大小和产品用于测试应当符合相关测试方法按照标准橡胶的其他物理性能的测试,除非其他厚度的测试样本必须在技术上考虑,建议以下厚度、2±0.2毫米,4±0.2毫米,适用于所有用特殊模制薄膜制备的测试样品。厚度按GB/T 5723方法测量;

It is mainly used for transporting high temperature materials such as sintered ore, Coke, and cement clinker in metallurgical and construction industries. The temperature of the material does not exceed 800 °C and the surface temperature does not exceed 220 °C. Features: EPR rubber is used as the covering layer, and the skeleton material is made of domestic special high-temperature canvas. The unique formula design solves the problems of high saturation, poor adhesion, and low interlayer adhesion of EPR rubber. It has the characteristics of light body, long life(about 2-4 times), and good heat resistance.
Physical properties of heat-resistant conveyor belts
Universal fabric conveyor belts with rubber or plastic cover are implemented using the draft ISO/FDIS14890-1999 international standards.
And the latest regulations for the preparation of standard samples of products for vulcanization or thermoplastic rubber, the measurement size of tropical resistant specimens and the use of products for testing shall be in conformity with the relevant test methods for testing other physical properties of the standard rubber, unless the test samples of other thicknesses must be considered technically, The following thickness, 2 ± 0.2 mm, 4 ± 0.2 mm is recommended for all test samples prepared with special molded films. Thickness is measured by GB/T 5723;


发布日期:2019-6-22
推荐产品